Actual API-936 Exam Recently Updated Questions with Free Demo
Free API API-936 Exam Questions Self-Assess Preparation
API-936 exam covers a broad spectrum of topics related to refractory materials, including types of refractory materials, installation and design principles, inspection techniques, and repair methods. API-936 examination is designed to test the candidate's knowledge and practical application of refractory principles in various industrial settings. API-936 exam consists of 120 multiple-choice questions and is administered in a computer-based format.
API-936 exam was developed by the American Petroleum Institute (API) and is recognized worldwide as the standard for refractory personnel certification. API-936 exam covers a wide range of topics, including refractory materials, design and installation, quality control, and inspection techniques. It is a rigorous exam that requires a thorough understanding of refractory materials and their application in various industries.
NEW QUESTION # 48
The vessel in which cracking reaction occurs or is completed and product gases are separated from coke and/or catalyst particulate is called
- A. Cyclones of FCCU
- B. Reactor of FCCU
- C. Regenerator of FCCU
- D. None of the above
Answer: B
NEW QUESTION # 49
Arrange for testing at either an independent laboratory or the manufacturer's plant is
- A. Owner responsibility
- B. Manufacturer responsibility
- C. Inspector responsibility
- D. Contractor responsibility
Answer: D
NEW QUESTION # 50
Testing frequency for material qualification of refractory for erosion service requires
- A. 1 sample per pallet or more from each production run
- B. 1 sample per pallet or less from each production run
- C. None of the above
- D. 2 samples per pallet or more from each production run
Answer: B
NEW QUESTION # 51
API 936, the standard test method for abrasion resistance of refractory materials at room temperature is
- A. C 704 - 01
- B. C 113 - 02
- C. None of the above
- D. C 181 - 91
Answer: A
NEW QUESTION # 52
The most common sizes in thickness for hex mesh are
- A. (20 - 25mm)
- B. (10 - 20mm)
- C. None of the above
- D. ¾ in or 1" (19mm or 25mm)
Answer: D
NEW QUESTION # 53
The vessel downstream of the reactor used to separate different product fractions is called
- A. Transfer line of FCCU
- B. Fractionator of FCCU
- C. None of the above
- D. Standpipe of FCCU
Answer: B
NEW QUESTION # 54
The term that describes the condition of pre-set refractory in which gravitational forces cause it to lose its desired shaped is called
- A. Bloating
- B. None of the above
- C. Slumping
- D. Punky
Answer: C
NEW QUESTION # 55
A natural or synthetic mineral theoretically consisting solely of alumina (Al2O3), specific gravity 4.00 - 4.02, melting point 3720?F. (2050? C) Hardness 8.8 is called
- A. Corundum
- B. Kaolin
- C. Mica
- D. None of the above
Answer: A
NEW QUESTION # 56
Applicator qualification for plastic thick layer, the test panel with an applied lining thickness and anchorage shall be
- A. 300 x 300 mm
- B. 600mm x 300 mm (24" x 12")
- C. None of the above
- D. 500 x 500 mm
Answer: B
NEW QUESTION # 57
Packing of chemical setting refractories should have mechanical protection by
- A. Cardboard
- B. Any of the above.
- C. Metal outside
- D. Rigid plastic
Answer: B
NEW QUESTION # 58
As per ASTM C- 704, for the erosion tests, silicon carbide grit is to be used by
- A. Three-time
- B. One time
- C. None of the above
- D. Two time
Answer: B
NEW QUESTION # 59
A combination of refractory grain and suitable bonding agent that, after the addition of a proper liquid, is generally poured into place to form a refractory shape or structure which becomes rigid because of chemical action is called
- A. mortar
- B. ceramic modules
- C. all of the above
- D. castable
Answer: D
NEW QUESTION # 60
The property of matter by virtue of which heat energy is transmitted through particles in contact.
- A. Thermal shock
- B. Thermal expansion
- C. None of the above
- D. Thermal conductivity
Answer: D
NEW QUESTION # 61
Hex mesh supplied in flexible rolls and ready fit to a curved surfaces is called
- A. Hexcel
- B. Hexalt anchor
- C. Flexmesh
- D. All of the above
Answer: C
NEW QUESTION # 62
The color of stripe for Inconel 600 alloy material of metallic anchor is
- A. 2 solid blue
- B. 1 solid black
- C. 2 solid black
- D. None of the above
Answer: A
NEW QUESTION # 63
Alumina - silica refractories containing 45% or more alumina, materials used in their production include diaspore, bauxite, gibbsite, kyanite, sillimanite, alusite, and fused alumina (artificial corundum) is called
- A. insulating refractories
- B. fire clay refractory
- C. high alumina refractories
- D. all of the above
Answer: C
NEW QUESTION # 64
Modulus of rupture test for castable refractories, the test specimen shall be
- A. 9 x 2 x 2 in (228 x 51 x 51mm)
- B. None of the above
- C. 6 x 2 x 2 in
- D. 8 x 2 x 2 in
Answer: A
NEW QUESTION # 65
A metallic anchor used to attach ceramic anchors to the casing or shall of a processing unit is
- A. U - anchor
- B. None of the above
- C. Claw anchor
- D. C-clip
Answer: D
NEW QUESTION # 66
......
API-936 Free Sample Questions to Practice One Year Update: https://prepaway.testinsides.top/API-936-dumps-review.html