[Aug-2022] CTFL-AuT Dumps are Available for Instant Access using TestInsides
CTFL-AuT Dumps 2022 - New ISQI CTFL-AuT Exam Questions
ISQI CTFL-AuT Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 14
Which of the following options describes a relevant aspect of the design of a test environment for software-ln-the-loop (SIL)?
- A. Software-m-the-Loop (SL) needs an Interface to the real vehicle or prototype.
- B. A wrapper is used as part of the testing with Software-in-the-Loop (SiL)
- C. With Software4rMhe-loop (SI), the tested software is implemented m a real control unit,
- D. For Software-in-the-Loop (SIL). usually no specific hardware is used
Answer: D
NEW QUESTION 15
Which statement regarding coding standards Is most true?
- A. Coding standards should increase the efficiency of the source code.
- B. Coding standards should educate the programmer
- C. Coding standards should increase the efficiency of the programmer
- D. Coding standards should increase the maintainability of the source code.
Answer: C
NEW QUESTION 16
During product development what does the tester create based on the Safety requirements?
- A. Test cases to check compliance with the MISRA-C:2012 coding standard
- B. Test cases and test procedure for the verification and validation of the safety related requirements
- C. Test cases and test procedures for production
- D. A software architecture that fulfils the requirement of .testability
Answer: D
NEW QUESTION 17
In which volume of ISO 26262 does the tester find requirements and recommendations for test- and verification-specific aspects of the SOFTWARE level?
- A. Volume 7 (ISO 26262-7)
- B. Volume 4 (ISO 26262-4)
- C. Volume 6 (ISO 26262-6)
- D. Volume 6 (ISO 262624)
Answer: C
NEW QUESTION 18
Which statement regarding the coding standard MlSRA-C:2012 Is true?
- A. A typical rule in MISRA-C is that the developer has documented the implemented behavior wen.
- B. MISRA-C defines rules and guidelines that are supposed to help avoid anomalies In object-oriented developed software (e.g. in C++)
- C. MISRA-C defines rules and guidelines. Rules are verifiable by static analysis tools and are always required.
- D. MISRA-C defines rules that include among others that the source code should not include nested comments.
Answer: B
NEW QUESTION 19
According to Automotive SPICE3.x, which statement regarding the requirements for a test strategy Is correct?
- A. Thetest log must Include methods for test case creation. for the selection of test cases, for the creation of test data and for the lest execution
- B. Thetest report must describe the test process including the identification of menaces and dependencies from other processes.
- C. In the regression testing strategy, methods must be defined for an impact analysis and the selection of appropriate test cases for regression testing
- D. Thetestlogs should be automated on all lest levels as much as possible to increase the comparability of the test results and reduce the effort for the lest execution.
Answer: A
NEW QUESTION 20
Which example describes a typical application of a closed-loop system?
- A. A cruise control is to be tested by reaching me target speed In a given time and holding this speed despite outside disturbances. Different driving scenarios are simulated for this.
- B. The correct reaction of the windscreen wiper is to be tested To do so. the ram sensor Is activated by water on the screen and the windscreen wiping activities are monitored.
- C. Activating the hazard warning lights is to be tested To do so. the flashing lights are monitored and the flashing frequency is measured and assessed.
- D. The setting of an error memory entry in the motor control unit Is to be tested To do so, the motor temperature is Increased above the critical limit and afterwards, the subsequent error memory entry will be read and assessed.
Answer: B
NEW QUESTION 21
Which Automotive Safety Integrity Levels does ISO 26262 describe?
- A. N (None), P (Partly). L (Largely). F (Fully)
- B. QM, ASH A, ASIL B, ASIL C, ASIL D
- C. ASIL A, ASIL B, ASIL C, ASIL D
- D. MlL, SiL, PiL, HiL, ViL
Answer: C
Explanation:
Explanation
There are four ASILs identified by ISO 26262A, B, C, and D. ASIL A represents the lowest degree and ASIL D represents the highest degree of automotive hazard.
https://www.synopsys.com/automotive/what-is-asil.html#:~:text=There%20are%20four%20ASILs%20identified
NEW QUESTION 22
ISO 26262 recognizes several context factors which influence the selection of testing techniques. Which statement is correct? Please choose the BEST POSSIBLE answer.
- A. ISO 26262 recommends specific testing techniques depending on the ASH level. Furthermore, the current state of technology must be considered
- B. An testing techniques are always applied to one test basis. The specific techniques, e.g. equivalence partition analysis, however, can always be applied.
- C. For the selection and the applicability of the test techniques, the test basis is important, but not fie test level.
- D. The risk assessment provides insights regarding the risks, whose causes will then be tested Intensively (independent of the testing technique).
Answer: A
NEW QUESTION 23
Your company produces electric windows and corresponding control units. The newest control unit for electric windows has repeatedly been problematic, which youthink result from issues In therequirements, in particular, you noticed Bee following requirements in your first review.
Which of the following requirements for the system test violates at least one of the quality criteria of the ISO/IEC/IEEE 29148:2011 ?
ID; 12. When the central lock is activated, then all windows are automatically closed.
ID; 37 Given: the ignition q activated. When the button tor a window is pressed down, then the window moves down.
ID; 85: Given: the window moves up. When the window encounters resistance, then the window ttng motor stops.
ID; 142; Given: a door is open When the button for a window is pressed then the message M-85 is sent to the control unit
- A. The requirement 12 is ambiguous.
- B. The requirement 142 is not verifiable on system level
- C. The requirement 37 is Inconsistent on system level.
- D. The requirement 85 is not atomic
Answer: B
NEW QUESTION 24
Which constraints does a SiL test environment have?
- A. In the SiL environment the simulation time is generally shorter than the real time.
- B. Electric error scenarios can be tested early.
- C. Numerous internal signals of the test object can be stimulated or observed.
- D. The test execution can be paused anytime for further analyses.
Answer: B
NEW QUESTION 25
Which statement regarding the objective of ASPICE and ISO 26262 Is true?
- A. To determine the capability of the product development process, ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASIL. For the development of E/E systems. ASPICE defines assessable requirements for the processes, Independently from the criticality.
- B. For the development of EE systems. ISO 26262 defines requirements for the processes and methods to be used by the tester depending on the ASH. To determine the capability of the product development process. ASPICE defines assessable requirements for these processes, independently from the critically
- C. For the development of E/E systems, ISO 26262 defines requirements for the processes and methods to be used by the tester independently from the ASIL. To determine the capability of the product development process. ASPICE defines assessable requirements for those processes depending on the critically.
- D. To determine the capacity of the product development process, ISO 26262 defines assessable requirements for these processes independently from the critically. For the development of E'E systems.
ASPICE defines requirements for the processes and methods to be used by the tester depending on the ASIL.
Answer: A
NEW QUESTION 26
In the release process, which of the following work products. Information and documents are the typical output of the tester?
- A. Non-detected defects
- B. Change request
- C. Tested lest objects
- D. Insulation recommendation
Answer: A
NEW QUESTION 27
In Automotive SPICIE. which capability level in software Integration testing is characterized by the following statement: ,,Define the objectives for the execution of the process.''
- A. Capability level 3
- B. Capability level 0
- C. Capability level 1
- D. Capability level 2
Answer: C
Explanation:
Explanation
https://www.automotivespice.com/fileadmin/software-download/Automotive_SPICE_PAM_30.pdf
NEW QUESTION 28
Which statement regarding AUTOSAR Is TRUE?
AUTOSAR describes...
- A. ...an open and standardized software architecture for vehicle development.
- B. ...activities, methods and measures to achieve functional security for electric and electronic solutions.
- C. ...an analysis unit, which processes Input signals and determines intermediate values and their respective output signals by using existing information.
- D. ...a collection of characteristics of the performance of processes of an organization.
Answer: A
Explanation:
Explanation
https://www.pathpartnertech.com/software-architecture-autosar-for-automotive-embedded-system/
NEW QUESTION 29
Which statement regarding the influence of the ASIL on test techniques, test types and test depths is true?
- A. Depending on the determined ASIL, ISO 26262 recommends the execution of different test design techniques and test types. Given this, the standard for higher ASlLs usually recommends more extensive and detailed measures.
- B. As the ASIL is a characteristic of the overall product, it ONLY influences the test of the Item in combination with the other items of the vehicle
- C. With ASIL A, the tester can choose the test design techniques and the test types freely. For ASIL B. C and D. ISO 26262 recommends the execution of different measures or combinations of measures
- D. Depending on the determined ASIL. ISO 26262 recommends the execution of different test design techniques and test types, it differentiates between five different degrees of recommendation: e.g not at all suitable (). recommended (-).
Answer: D
NEW QUESTION 30
......
ISQI CTFL-AuT Exam Practice Test Questions: https://prepaway.testinsides.top/CTFL-AuT-dumps-review.html