[Full-Version] 2026 New 300-715 Actual Exam Dumps, Cisco Practice Test
Study HIGH Quality 300-715 Free Study Guides and Exams Tutorials
Cisco ISE is a network security solution that provides a centralized platform for policy management and enforcement, identity management, access control, and threat detection. The solution is widely used by businesses and organizations of all sizes to secure their networks and protect against cyber threats. The Cisco 300-715 exam is designed to test your knowledge and skills in implementing and configuring Cisco ISE solutions to meet the specific security needs of your organization.
Cisco 300-715 certification exam is intended for network security engineers, network administrators, and security architects who want to demonstrate their expertise in Cisco ISE solutions. By earning this certification, candidates can enhance their career prospects by demonstrating their knowledge and expertise in managing and securing enterprise networks with Cisco ISE.
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Network access device administration
The following will be discussed in CISCO 300-715 exam dumps:
- Compare AAA protocols
- Configure posture conditions and policy, and client provisioning
- Configure the compliance module
NEW QUESTION # 47
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
NEW QUESTION # 48
An organization is adding nodes to their Cisco ISE deployment and has two nodes designated as primary and secondary PAN and MnT nodes. The organization also has four PSNs An administrator is adding two more PSNs to this deployment but is having problems adding one of them What is the problem?
- A. One of the new nodes must be designated as a pxGrid node
- B. Only five PSNs are allowed to be in the Cisco ISE cube if configured this way.
- C. The new nodes must be set to primary prior to being added to the deployment
- D. The current PAN is only able to track a max of four nodes
Answer: B
NEW QUESTION # 49
A network administrator must configura endpoints using an 802 1X authentication method with EAP identity certificates that are provided by the Cisco ISE. When the endpoint presents the identity certificate to Cisco ISE to validate the certificate, endpoints must be authorized to connect to the network. Which EAP type must be configured by the network administrator to complete this task?
- A. EAP-TTLS
- B. EAP-FAST
- C. EAP-TLS
- D. EAP-PEAP-MSCHAPv2
Answer: C
Explanation:
https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/certificate- requirements-eap-tls-peap
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/eap-fast/200322-Understanding- EAP-FAST-and-Chaining-imp.html
NEW QUESTION # 50
Which service must be configured on Cisco ISE to authenticate a network endpoint with the MAC address 00:00:00:00:00:AA by gathering endpoint information dynamically?
- A. 802.1X
- B. BYOD provisioning
- C. posture
- D. profiling
Answer: D
Explanation:
Profiling must be configured on Cisco ISE to dynamically gather endpoint attributes (such as MAC address behavior and traffic patterns) and authenticate endpoints based on learned information rather than user credentials.
NEW QUESTION # 51 
Refer to the exhibit. Which command is typed within the CLI of a switch to view the troubleshooting output?
- A. show authentication interface gigabitethernet2/0/36
- B. show authentication sessions mac 000e.84af.59af details
- C. show authentication registrations
- D. show authentication sessions method
Answer: B
Explanation:
Section: Policy Enforcement
NEW QUESTION # 52
An engineer builds a five-node distributed Cisco ISE deployment The first two deployed nodes are responsible for the primary and secondary administration and monitoring personas Which persona configuration is necessary to have the remaining three Cisco ISE nodes serve as dedicated nodes in the Cisco ISE cube that is responsible only for handling the RADIUS and TACACS+ authentication requests, identity lookups, and policy evaluation?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: C
NEW QUESTION # 53
Which action must be taken before configuring the Secure Client Agent profile when creating the Secure Client configuration for ISE posture services?
- A. Create a posture remediation condition policy for the Agent profile.
- B. Configure the posture policy for Secure Client posturing module.
- C. Create a posture condition that references the Secure Client package.
- D. Upload the Secure Client packages and the Secure Client compliance modules.
Answer: D
Explanation:
Before configuring the Secure Client Agent profile for ISE posture services, you must upload the Secure Client packages and the Secure Client compliance modules. These packages are necessary for deployment and use of posture assessment features on endpoints.
NEW QUESTION # 54
An administrator for a small network is configuring Cisco ISE to provide dynamic network access to users.
Management needs Cisco ISE to not automatically trigger a CoA whenever a profile change is detected.
Instead, the administrator needs to verify the new profile and manually trigger a CoA.
What must be configuring in the profiler to accomplish this goal?
- A. Reauth
- B. Session Query
- C. No CoA
- D. Port Bounce
Answer: C
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-policies
NEW QUESTION # 55
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. subject alternative name and the common name
- B. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
- C. user-presented certificate and a certificate stored in Active Directory
- D. user-presented password hash and a hash stored in Active Directory
Answer: A,B
Explanation:
Explanation
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user.
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION # 56
Refer to the exhibit Which switch configuration change will allow only one voice and one data endpoint on each port?
- A. Auto to manual
- B. Multi-auth to multi-domain
- C. Mab to dot1x
- D. Multi-auth to single-auth
Answer: B
Explanation:
Reference:
https://community.cisco.com/t5/network-access-control/cisco-ise-multi-auth-or-multi-host/m-p/3750907
NEW QUESTION # 57
A network engineer has been tasked with enabling a switch to support standard web authentication for Cisco ISE. This must include the ability to provision for URL redirection on authentication Which two commands must be entered to meet this requirement? (Choose two)
- A. Ip http server
- B. Ip http secure-server
- C. Ip http authentication
- D. Ip http redirection
- E. Ip http secure-authentication
Answer: A,B
Explanation:
https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_0111001.html
NEW QUESTION # 58
A security engineer configures a Cisco Catalyst switch to use Cisco TrustSec. The engineer must define the PAC key to authenticate the switch to Cisco IISE. Drag and drop the commands from the left into sequence on the right. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 59
What is needed to configure wireless guest access on the network?
- A. Captive Portal Bypass turned on
- B. endpoint already profiled in ISE
- C. WEBAUTH ACL for redirection
- D. valid user account in Active Directory
Answer: C
NEW QUESTION # 60
The security team identified a rogue endpoint with MAC address 00:46:91:02:28:4A attached to the network. Which action must security engineer take within Cisco ISE to effectively restrict network access for this endpoint?
- A. Configure access control list on network switches to block traffic.
- B. Create authentication policy to force reauthentication.
- C. Add MAC address to the endpoint quarantine list.
- D. Implement authentication policy to deny access.
Answer: C
Explanation:
Cisco ISE provides a feature called Adaptive Network Control (ANC) that allows administrators to apply policies to endpoints based on their behavior or status1. One of the ANC policies is Quarantine, which restricts network access for an endpoint by assigning it to a limited-access VLAN or applying an access control list (ACL) on the switch port2. To use the Quarantine policy, the administrator must add the MAC address of the rogue endpoint to the endpoint quarantine list in ISE2. This will trigger a change of authorization (CoA) for the endpoint and apply the Quarantine policy. The other options are not effective for restricting network access for a rogue endpoint, as they do not use the ANC feature of ISE.
NEW QUESTION # 61
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. DNS probe
- B. DHCP SPAN probe
- C. SNMP query probe
- D. RADIUS probe
- E. NetFlow probe
Answer: C,D
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION # 62
Which Cisco ISE module contains a list of vendor names, product names, and attributes provided by OPSWAT?
- A. Posture Module
- B. Client Provisioning Module
- C. Endpoint Security Module
- D. Compliance Module
Answer: A
NEW QUESTION # 63
A policy is being created in order to provide device administration access to the switches on a network. There is a requirement to ensure that if the session is not actively being used, after 10 minutes, it will be disconnected. Which task must be configured in order to meet this requirement?
- A. session timeout
- B. monitor
- C. idle time
- D. set attribute as
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_admin_accesspolicy_settings.html#reference_0E24B8FBFAB248219E1194435670347F
NEW QUESTION # 64
Which nodes are supported in a distributed Cisco ISE deployment? (Choose two.)
- A. Policy Service nodes for session failover
- B. Monitoring nodes for PxGrid services
- C. Administration nodes for session failover
- D. Policy Service nodes for automatic failover
Answer: A,B
NEW QUESTION # 65
A network administrator is configuring authorization policies on Cisco ISE.
There is a requirement to use AD group assignments to control access to network resources.
After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work.
What is the cause of this issue?
- A. The certificate checks are not being conducted.
- B. The AD DNS response is slow.
- C. The AD join point is no longer connected.
- D. The network devices ports are shut down.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
3/ise_active_directory_integration/b_ISE_AD_integration_2x.html#ID612
NEW QUESTION # 66
An engineer is deploying a new Cisco ISE environment for a company. The company wants the deployment to use TACACS+. The engineer verifies that Cisco ISE has a Device Administration license. What must be configured to enable TACACS+ operations?
- A. Device Administration Work Center
- B. Device Admin service
- C. Device Administration Deployment settings
- D. Device Admin Policy Sets settings
Answer: B
Explanation:
The Device Admin service must be explicitly enabled on the Cisco ISE node to activate TACACS+ functionality. Even with a Device Administration license installed, TACACS+ operations will not run until this service is turned on under the node's service settings.
NEW QUESTION # 67
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. static IP tunneling
- B. AAA override
- C. override Interface ACL
- D. DHCP server
Answer: B
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/ b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010110111.html
NEW QUESTION # 68
Which default endpoint identity group does an endpoint that does not match any profile in Cisco ISE become a member of?
- A. profiled
- B. unknown
- C. endpoint
- D. allow list
- E. block list
Answer: B
Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html
NEW QUESTION # 69
......
Get 100% Real Free CCNP Security 300-715 Sample Questions: https://prepaway.testinsides.top/300-715-dumps-review.html