[May 11, 2024] New 1Y0-241 Exam Dumps with High Passing Rate
Get 1Y0-241 Braindumps & 1Y0-241 Real Exam Questions
Citrix 1Y0-241 exam is designed to assess your skills and knowledge in deploying and managing Citrix ADC 13 with Traffic Management. 1Y0-241 exam is primarily intended for IT professionals who have experience in networking, virtualization, and cloud computing. By passing the exam, you will become a certified Citrix ADC expert and be able to demonstrate your ability to deploy and manage complex Citrix environments.
NEW QUESTION # 43
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC VPX
- B. Citrix ADC SDX
- C. Citrix ADC CPX
- D. Citrix ADC MPX
Answer: C
NEW QUESTION # 44
What can a Citrix Administrator use to restrict access to the Citrix ADC management IP (NSIP) address?
- A. Authentication policy
- B. Access Control List (ACL)
- C. Authorization policy
- D. Command policy
Answer: B
NEW QUESTION # 45
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
Answer: C
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX122921
NEW QUESTION # 46
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?
- A. The junior administrator made the changes and did NOT force a failover to save the configuration.
- B. The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
- C. The Citrix ADC appliances have different firmware versions.
- D. Both Citrix ADCs in the HA pair restarted overnight.
Answer: D
NEW QUESTION # 47
Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1 "!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\"Admin_group\"))" RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?
- A. Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.
- B. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.
- C. All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.
- D. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.
Answer: B
NEW QUESTION # 48
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that users have the certificate's private key.
- B. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- C. Ensure that users have the certificate's public key.
- D. Ensure that users have the server certificate installed.
Answer: B
Explanation:
Explanation
https://support.citrix.com/article/CTX101990
NEW QUESTION # 49
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image shrink-to attributes
- B. Image optimization
- C. Domain sharding
- D. Image lazy loading
Answer: B
NEW QUESTION # 50
Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done simultaneously.
What upgrading flexibility does SDX provide in this scenario?
- A. The Citrix ADC instances must be upgraded simultaneously.
- B. The Citrix ADC instances can be upgraded from the lights out management (LOM) port and Citrix Cloud services to different firmware versions.
- C. The Citrix ADC instances can be upgraded at the SDX management level, allowing all instances to be upgraded simultaneously.
- D. The Citrix ADC instances can be upgraded on an individual basis, allowing all instances to run independent firmware versions.
Answer: C
NEW QUESTION # 51
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP_ECV on port 99
- B. HTTP on port 99
- C. HTTP on port 80
- D. HTTP-ECV on port 80
Answer: A
Explanation:
Explanation
destPort TCP or UDP port to which to send the probe. If the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a monitor of type USER, however, the destination port is the port number that is included in the HTTP request sent to the dispatcher.
Does not apply to monitors of type PING.
NEW QUESTION # 52
Which step can a Citrix Administrator take to use default compression policies?
- A. Enable compression on the associated bound services.
- B. Disable the Citrix ADC compression feature at a global level.
- C. Bind the default compression policies to the vServer.
- D. Select the compression algorithm (gzip/deflate/identity).
Answer: A
Explanation:
To put a compression policy into effect, you must bind it either globally, so that it applies to all traffic that flows through the Citrix ADC, or to a specific virtual server, so that the policy applies only to requests whose destination is the VIP address of that virtual server.
By default, compression is disabled on the Citrix ADC. You must enable the feature before configuring it. You can enable it globally so that it applies to all HTTP and SSL services, or you can enable it just for specific services.
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/enable-compression-on-service.htm
NEW QUESTION # 53
Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A service attached to this vServer is brought into the effective state during production hours.
During the startup of a vServer, which load-balancing method is used by default?
- A. Custom load
- B. Least connections
- C. Round-robin
- D. Least bandwidth
Answer: C
Explanation:
Explanation
During startup of a virtual server, or whenever the state of a virtual server changes, the virtual server can initially use the round-robin method to distribute the client requests among the physical servers. This type of distribution, referred to as startup round robin, helps prevent unnecessary load on a single server as the initial requests are served. After using the round-robin method at the startup, the virtual server switches to the loadbalancing method specified on the virtual server answer: D. Round-robin Short Explanation with reference:
A load-balancing vServer is a virtual server that distributes the incoming traffic among a group of services that provide the same content or functionality. A load-balancing vServer can use different load-balancing methods to select the best service for each request, based on various criteria, such as availability, performance, or load.
The least bandwidth load-balancing method selects the service that is currently handling the least amount of traffic, measured in megabits per second.
However, during the startup of a vServer, the least bandwidth load-balancing method is not used by default.
This is because the Citrix ADC appliance does not have enough data to calculate the bandwidth usage of each service at the beginning. Therefore, the appliance uses the round-robin load-balancing method by default, which selects the services in a circular order, without any weighting or priority. The round-robin load-balancing method is also used as a fallback method when other load-balancing methods fail or are not applicable.
Therefore, the correct answer is D. Round-robin.
Load balancing methods | NetScaler : How Load Balancing Methods Work - Citrix Customer Support
NEW QUESTION # 54
What is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
- B. If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http:// www.newdomain.com/mysite/.
- C. If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain .com/mysite/
. - D. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
Answer: C
NEW QUESTION # 55
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Two-arm
- B. Forward proxy
- C. One-arm
- D. Transparent
Answer: A
Explanation:
Explanation
answer: B. Two-arm
Short Explanation with reference:
A two-arm deployment is a common scenario where the Citrix ADC appliance has two network interfaces, one connected to the DMZ network and the other connected to the internal network1. This allows the appliance to act as a gateway between the two networks and provide load balancing, security, and optimization features for the applications hosted on the internal servers2. A two-arm deployment also provides better isolation and protection for the internal network than a one-arm deployment, where the appliance has only one network interface connected to a switch or router that spans both networks3. A transparent mode is a packet forwarding mode that enables the appliance to act as a Layer 2 device and bridge packets that are not destined for it4. A forward proxy mode is a feature that enables the appliance to act as an intermediary between clients and servers on the internet, caching web content and applying policies. Neither of these modes are relevant for the scenario described in the question.
1: Citrix ADC at a Glance 2: Tech Paper: Best practices for NetScaler ADC Deployments 3: Configure a Citrix ADC BLX appliance with a network mode 4: Packet forwarding modes | NetScaler 14.1 : Configuring Forward Proxy | NetScaler 14.1
NEW QUESTION # 56
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on Independent Network Configuration (INC) mode.
- B. Turn on HA monitoring on all interfaces
- C. Configure SyncVlan
- D. Turn on fail-safe mode.
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/ configuring-high-availability-nodes-different-subnets.html
NEW QUESTION # 57
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.
set gslb parameter -ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
- A. Empty Domain Service (EDS)
- B. Round-trip time (RTT)
- C. Time to live (TTL)
- D. Multiple IP responses (MIR)
Answer: B
NEW QUESTION # 58
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Configure CS policies that designate a load-balancing vServer as the target vServer.
- B. Bind the GSLB domain to the GSLB vServer.
- C. Configure a CS vServer of target type GSLB.
- D. Bind the domain to the CS vServer instead of the GSLB vServer.
Answer: A,C
NEW QUESTION # 59
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. route
- B. drop
- C. process
- D. bridge
Answer: A
NEW QUESTION # 60
......
1Y0-241 Dumps To Pass Citrix Exam in 24 Hours - TestInsides: https://prepaway.testinsides.top/1Y0-241-dumps-review.html