Pass CCNP Service Provider 300-510 exam [Mar 05, 2022] Updated 104 Questions
Cisco 300-510 Actual Questions and 100% Cover Real Exam Questions
What is the duration, language, and format of Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
- Format: Multiple choice
- Duration of Exam: 90 minutes
- Language of Exam: English
- Validity: 3 years
Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Certification Path
Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam is affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. This is the official prerequisite for this exam. However, the course, Integrating VPN Services from Cisco Service Provider, allows applicants to prepare for this exam and is highly recommended.
Prerequisites for Final Exam
The individuals concerned will already have awareness and skills involving how to execute and operate Cisco core technologies for the networks that are targeted at the Service Providers. They should also have a deep comprehension of the 300-510 subject matter so gaining the requisite knowledge takes deliberate learning that makes use of recommended courses as well as revision or study guides. Potential candidates should also be aware of the registration process for the official test. Thus, they should have a Pearson VUE account before they can do the final registration, which includes selecting the number of the evaluation they intend to do.
NEW QUESTION 23
Refer to the exhibit.
What is the relationship between Router 1 and Router 2?
- A. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.
- B. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.
- C. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.
- D. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.
Answer: D
NEW QUESTION 24
Refer to the exhibit.
Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 2 must have a tunnel interface created with router 1 as the destination
- B. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- C. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- D. Router 1 must define an explicit path to router 2
Answer: C
NEW QUESTION 25
What is used by SR-TE to steer traffic through the network?
- A. shortest path calculated by IGP
- B. explicit maps
- C. dynamic rules
- D. path policy
Answer: D
NEW QUESTION 26
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured with a route reflector
- B. It must be configured with send labels
- C. It must be configured for graceful restart
- D. It must be configured with PIC edge
Answer: B
NEW QUESTION 27
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured with a route reflector
- B. It must be configured with send labels
- C. It must be configured for graceful restart
- D. It must be configured with PIC edge
Answer: B
NEW QUESTION 28
Which difference should be considered when intradomain or interdomain multicast routing is implemented?
- A. Interdomain multicast routing relies on PIM-DM and intradomain multicast routing relies on PIM-SM.
- B. A network uses intradomain multicast routing without interdomain routing but networks that use interdomain multicast routing must also apply intradomain routing
- C. interdomain multicast routing uses BIDR-PIM to establish neighbor relationships between AS and interdomain multicast routing uses MSDP
- D. Interdomain multicast routing requires an IS-IS or OSPF neighbor relationship between the domains but intradomain multicast routing requires only BGP
Answer: B
NEW QUESTION 29 
Refer to the exhibit. After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
- A. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
- B. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- C. Router 2 uses router 3 as the next hop for 192.168.0.0/24
- D. Router 2 uses router 1 as the next hop for 192.168.0.0/24
Answer: B
NEW QUESTION 30
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 31
Refer to the exhibit.
Routers RA and RB are IS-IS peers configured for NSF but router RC is an IS-IS peer without NSF capability If RA undergoes processor switchover what is the effect on the network environment?
- A. If RC is operating without the Cisco configuration option all three routers tear down their peering relationships and re-establish peering
- B. All peer relationships remain up and the link-state database is unchanged
- C. All peer relationships remain up, but the link-state database is rebuilt on each device
- D. If RC is operating without the Cisco configuration option only 2 routers tear down their peering relationships and re-establish peering
Answer: C
NEW QUESTION 32
Refer to the exhibit. Which LSA type is indicated by this router output?
- A. type 1 LSA
- B. type 3 LSA
- C. type 4 LSA
- D. type 2 LSA
Answer: A
NEW QUESTION 33
Refer to the exhibit.
A network operators configuring BGP PIC on CE1 on already established neighborships with PE1ana PE2 inside the fully converged MPLS network Which element needs to be implemented to make this feature function effectively?
- A. BGP import export policies must be applied on all devices for the routes needing BGP for PIC
- B. The operator must ensure that all prefixes have the same next-hop from PE1 and PE2 for BGP PICA reserved BGP
- C. community of 1 10 must be used to denote the PIC feature set to the routing protocol
- D. Bidirectional Forwarding Detection must be applied to the upstream facing BGP interfaces.
Answer: D
NEW QUESTION 34
Refer to the exhibit.
An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
- A. Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed.
- B. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed.
- C. Router 1 must have the keyword included in the redistribution command for all EIGRP routes to be redistributed.
- D. Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed.
Answer: C
NEW QUESTION 35
Refer to the exhibit.
A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 36 
Refer to the exhibit. Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 2 must have a tunnel interface created with router 1 as the destination
- B. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- C. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- D. Router 1 must define an explicit path to router 2
Answer: C
NEW QUESTION 37
Refer to the exhibit.
P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other. Which action fixes the issue?
- A. Change HMAC-MD5 to MD5
- B. Change HMAC-MD5 to HMAC-SHA1-12
- C. Configure the send and accept lifetime under key 1
- D. Change HMAC-MD5 to HMAC-SHA1-20
Answer: C
NEW QUESTION 38
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. R1 prefer to use R5 as the next hop to reach R4
- B. All links have equal cost if the default metric is used
- C. R4 prefer to reach R5 using R1 as the next hop
- D. R5 prefers to use R4 as the next hop for all routes
Answer: B
NEW QUESTION 39
Refer to the exhibits.
A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1.
Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/3 - forwarding label 24001
- B. PE1 - Gi0/0/0/2 - forwarding label 24001
- C. PE1 - Gi0/0/0/3 - forwarding label 24002
- D. PE1 - Gi0/0/0/2 - forwarding label 24002
Answer: A
NEW QUESTION 40
Refer to the exhibit.
Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?
- A. Router 2 must have a tunnel interface created with router 1 as the destination
- B. Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- C. Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1
- D. Router 1 must define an explicit path to router 2
Answer: C
NEW QUESTION 41
......
Cisco 300-510 Real 2022 Braindumps Mock Exam Dumps: https://prepaway.testinsides.top/300-510-dumps-review.html