156-835 Exam Brain Dumps - Study Notes and Theory [Feb-2024]
100% Guaranteed Results 156-835 Unlimited 66 Questions
Successfully passing the Check Point Certified Maestro Expert exam is a significant achievement for IT professionals who are looking to enhance their security network management skills. It demonstrates a deep understanding of the latest technologies and techniques used in modern security networks, and is a valuable asset for anyone seeking to advance their career in this field.
CheckPoint 156-835 certification exam is designed for professionals who want to prove their expertise in using Check Point Maestro technology. Check Point Maestro is a powerful network solution that allows organizations to manage their security infrastructure on a massive scale. Check Point Certified Maestro Expert certification exam tests the knowledge and skills of candidates in areas such as Maestro orchestration, security management, and troubleshooting.
NEW QUESTION # 38
What is a downlink interface used for?
- A. To connect Orchestrators to customer's infrastructure
- B. To connect in between Orchestrators
- C. To connect appliances to customer's infrastructure
- D. To connect appliances to Orchestrators
Answer: D
NEW QUESTION # 39
What is the default IP range of CIN network (with no increment)?
- A. 192.168.1.0
- B. 192. 0 .2 .0
- C. The same as Management network
- D. 198 .51 .100. 0
Answer: D
NEW QUESTION # 40
What cannot be a reason for DETACHED status of Appliance when running asg monitor command?
- A. Appliance is a member of Security Group, but currently disconnected
- B. There's an issue with Downlink cable
- C. Appliance reboots
- D. Appliance installed with R80.20
Answer: D
NEW QUESTION # 41
What is the Iterator process?
- A. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- C. Iterator is the process that simulates distribution in case of Appliance failure
- D. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
Answer: A
Explanation:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.
NEW QUESTION # 42
Complete the sentence: When using a Break-out cable...
- A. All tails of the break-out cable must represent uplinks
- B. All tails of the break-out cable must represent downlinks
- C. All tails of the break-out cable must represent the same type of ports
- D. Each tail of the break-out cable represent an independent port
Answer: D
NEW QUESTION # 43
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?
- A. 0
- B. All 10
- C. 1
- D. Between 2 and 4
Answer: D
NEW QUESTION # 44
What command should be used for collecting diagnostic information about the orchestrator?
- A. cpinfo
- B. asg pert -v
- C. orch_info
- D. cpview
Answer: C
NEW QUESTION # 45
What kind of cluster Dual-Site can be compared to?
- A. Active-Standby only
- B. Active-Active
- C. VSLS only
- D. Active-Standby or VSLS
Answer: B
NEW QUESTION # 46
What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?
- A. Additional ports used as uplinks.
- B. 1Gbps connectivity for Security Groups.
- C. Reserved for internal purposes. Not in use.
- D. Out-of-band interfaces for access to Orchestrator itself.
Answer: D
NEW QUESTION # 47
One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?
- A. 1M
- B. 2M
- C. 500K
- D. 4M
Answer: B
Explanation:
One single Appliance supports 1M concurrent connections, so a Security Group of 2 Appliances will support 2M concurrent connections.
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380 How to troubleshoot Gaia Portal (WebUI)
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380
https://downloads.checkpoint.com/dc/download.htm?ID=103853
VSX R81 Administration Guide
https://downloads.checkpoint.com/dc/download.htm?ID=103853
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm List of All Resolved Issues and New Features
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm
NEW QUESTION # 48
What will happen in case of NAT of the traffic passing through Management network?
- A. This traffic will pass with no inspection
- B. Orchestrator will disable NAT and traffic will pass with no issue
- C. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances
- D. This traffic will not pass correction, since it will be dropped
Answer: D
NEW QUESTION # 49
What is the throughput penalty of Security Group?
- A. 5% per member
- B. Depends on the type of Appliance
- C. 10% per Security Group with no relation to amount of members
- D. 1% per member
Answer: D
NEW QUESTION # 50
What is the difference between Dual-Site and Multi-Room?
- A. Multi-Room is a kind of Dual-Site deployment within the same building
- B. Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators
- C. Multi-Room is Active / Standby and Dual-Site is Active / Active
- D. This is the same
Answer: A
NEW QUESTION # 51
What is the default IP range of Sync network (with no increment)?
- A. 192.168.1.0
- B. 198.51.100.0
- C. The same as Management network
- D. 192.0.2.0
Answer: D
NEW QUESTION # 52
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
- A. On Orchestrator: Change port type from uplink to downlink
- B. On Appliance: Change a port speed to 10Gbps
- C. No change required
- D. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
Answer: A
NEW QUESTION # 53
What is the default range of physical ports for downlinks on Orchestrator MHO-140?
- A. 25 - 47
- B. 27 - 47
- C. 1 - 48
- D. 1 - 25
Answer: B
NEW QUESTION # 54
What does the lldpctl command do?
- A. Show all devices discovered by LLDP protocol on downlink ports
- B. Show all devices discovered by LLDP protocol on uplink ports
- C. Discover orchestrators
- D. Show all devices discovered by LLDP protocol on all ports
Answer: D
NEW QUESTION # 55
What is the Sync network on Appliances used for?
- A. May be used for any purpose, but synchronization always have priority
- B. To transfer data in case of full utilization of the downlink interfaces
- C. To transfer configuration files from Orchestrators to Appliances
- D. To synchronize configurations and connections in between connection tables of different Appliances
Answer: D
NEW QUESTION # 56
How many power supplies are presented on MHO-140?
- A. 1 with option for 2
- B. 0
- C. 1
- D. 2
Answer: D
NEW QUESTION # 57
......
156-835 Dumps PDF - Want To Pass 156-835 Fast: https://prepaway.testinsides.top/156-835-dumps-review.html