The Ultimate Veritas VCS-285 Dumps PDF Review
Achieve The Utmost Performance In VCS-285 Exam Pass Guaranteed
NEW QUESTION # 56
Which resource should be used for analyzing and optimizing NetBackup Appliances?
- A. Veritas NetBackup Appliance Commands Reference Guide: v5.0
- B. Veritas NetBackup Appliance Administrator's Guide: v5.0
- C. Veritas NetBackup Deduplication Guide: v10.1
- D. Veritas NetBackup 10.1 Administrator's Guide, Volume I
Answer: B
NEW QUESTION # 57
A NetBackup appliance is reporting an error with the message "Media error: 0x00000002".
What does this error mean?
- A. The media is full.
- B. The media is damaged.
- C. The media is not inserted in the device correctly.
Answer: C
NEW QUESTION # 58
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
- A. set the "Maximum jobs per client" host property
- B. enable the "Limit Jobs per policy" attribute
- C. enable multiplexing for the storage unit and set the value
- D. set the "Allow multiple data streams" policy attribute
Answer: B
NEW QUESTION # 59
Which of the following resources can be used to tune NetBackup Appliances using the Appliance Web Console?
- A. Veritas NetBackup Appliance Commands Reference Guide: v5.0
- B. Veritas NetBackup Appliance Administrator's Guide: v5.0
- C. Veritas NetBackup Deduplication Guide: v10.1
- D. Veritas NetBackup 10.1 Administrator's Guide, Volume I
Answer: B
NEW QUESTION # 60
A NetBackup appliance is not restoring data from a specific backup file. What steps can be taken to troubleshoot the problem?
- A. Contact Veritas Support for assistance.
- B. Check the appliance's logs for errors.
- C. Check the backup file's permissions.
Answer: B
NEW QUESTION # 61
An administrator creates a Storage Lifecycle Policy (SLP) to take advantage of optimized duplication. The backup and subsequent duplication jobs launch as configured in the SLP.
What may cause the secondary duplication job to run as non-optimized?
- A. Optimized duplication requires the media servers to be configured as Fibre Transport media servers.
- B. Both source and destination storage servers have only one media server in common.
- C. Both compression and encryption attributes are disabled in the backup policy.
- D. Optimized duplication is unsupported when a storage unit group is the target of the duplication.
Answer: A
NEW QUESTION # 62
How can you verify the integrity of a backup image?
- A. Restore the image to a test system and verify that it is functional.
- B. Use the NetBackup administration console to verify the checksum of the image.
- C. Use a third-party tool to verify the integrity of the image.
Answer: A,B,C
NEW QUESTION # 63
Which guide should be consulted to learn about the function and configuration of cloud storage in NetBackup?
- A. Veritas NetBackup Deduplication Guide
- B. Veritas NetBackup AdvancedDisk Storage Solutions Guide
- C. Veritas NetBackup Status Codes Reference Guide
- D. NetBackup Web UI Cloud Administrator's Guide
Answer: D
NEW QUESTION # 64
What is required to implement Auto Image Replication?
- A. OST-compliant storage or MSDP and at least two master servers
- B. BasicDisk or AdvancedDisk storage units and at least two master servers
- C. OST-compliant storage or MSDP and at least one master server
- D. BasicDisk or AdvancedDisk storage units and at least one master server
Answer: A
NEW QUESTION # 65
How can an administrator determine the storage and database paths for an MSDP?
- A. view Disk Pool > Disk volumes for the MSDP disk pool
- B. run the Configure Disk Storage Server wizard for the MSDP
- C. view Storage Server > Properties for the storage server
- D. view Storage Unit > View Properties for the MSDP storage unit
Answer: C
NEW QUESTION # 66
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
- A. set "Enable unrestricted media sharing for all media servers"
- B. add the client IP addresses to "Resilient Networks"
- C. increase the "MPX_RESTORE_DELAY" setting on the master server
- D. increase "Restore retries"
Answer: D
NEW QUESTION # 67
Which supported step should an administrator perform to ensure all operating system logs are sent from an appliance to a central logging server running Linux?
- A. configure a cron job on the appliance to copy the logs
- B. configure syslog forwarding in OpsCenter
- C. configure access to the appliance logs with the share open command
- D. configure syslog forwarding in the appliance CLISH
Answer: C
NEW QUESTION # 68
What are the two types of log files that record all activities related to NetBackup appliance security?
- A. secure.log and auth.log
- B. security.log and audit.log
- C. secure.log and audit.log
- D. security.log and auth.log
Answer: B
NEW QUESTION # 69
What are the two types of deduplication that NetBackup supports for backup data?
- A. Source-side deduplication and target-side deduplication
- B. Inline deduplication and post-processing deduplication
- C. Client-side deduplication and media server deduplication
- D. All of the above
Answer: D
NEW QUESTION # 70
What are the different reports that are available to verify and monitor NetBackup?
- A. Image integrity reports
- B. Backup job status reports
- C. All of the above
- D. Storage utilization reports
Answer: A,B,D
NEW QUESTION # 71
Where can an administrator add or list the service providers for cloud storage?
- A. NetBackup Management > Host Properties > Media Servers > Scalable Storage
- B. NetBackup Management > Host Properties > Master Servers > Scalable Storage
- C. NetBackup Management > Host Properties > Master Servers > Cloud Storage
- D. NetBackup Management > Host Properties > Media Servers > Cloud Storage
Answer: C
NEW QUESTION # 72
What are the two types of cloud storage that NetBackup supports for backup data?
- A. CloudStorage and CloudStoragePool (CSP)
- B. CloudPoint and CloudStoragePool (CSP)
- C. CloudPoint and CloudCatalyst
- D. CloudStorage and CloudServer
Answer: B
NEW QUESTION # 73
A NetBackup restore job has failed with the status code 702. What does this status code mean?
- A. The restore job was unable to access the target data.
- B. The restore job was unable to read the backup data from the target device.
- C. The restore job was unable to connect to the target device.
- D. The restore job was terminated by the user.
Answer: A
NEW QUESTION # 74
How do you create a new disk pool in NetBackup?
- A. From the NetBackup AdvancedDisk Storage Solutions Guide, run the nbdevconfig command with the
-createpool option - B. From the NetBackup Cloud Administrator's Guide, configure a new cloud storage pool and convert it to a disk pool
- C. From the NetBackup Web UI, navigate to the Storage > Disk Pools tab and click Add
- D. From the NetBackup Administration Console, navigate to the Devices > Disk Pools tab and click New
Answer: C
Explanation:
Explanation
(Explanation: To create a new disk pool in NetBackup, you can use the NetBackup Web UI by navigating to the Storage > Disk Pools tab and clicking Add, where you can specify the disk pool name, storage unit group, and other disk pool parameters.)
NEW QUESTION # 75
......
Achive your Success with Latest Veritas VCS-285 Exam: https://prepaway.testinsides.top/VCS-285-dumps-review.html