Workday-Pro-HCM-Reporting Actual Questions Answers PDF 100% Cover Real Exam Questions
Workday-Pro-HCM-Reporting Exam questions and answers
NEW QUESTION # 12
You are configuring a data column on a composite report. You would like to map a subreport prompt to a value in a prompt set, but the prompt is not appearing on the Map Sub Report Prompts grid in the column configuration options.
What could be causing this?
- A. You already set a default value for the prompt on the subreport.
- B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
- C. You do not have access to the domain securing the report prompt.
- D. You did not select Use Value From Prompt Set as the default prompt value in the subreport.
Answer: B
Explanation:
In Workday, when you configure composite reports, you can map subreport prompts to prompt sets for greater flexibility. However, if the Do Not Prompt at Runtime checkbox is selected on the subreport prompt, the prompt will not be exposed in the Map Sub Report Prompts grid. This is because Workday interprets the prompt as suppressed and therefore not available for mapping at runtime.
From the Workday binder: "Prompts suppressed with the Do Not Prompt at Runtime option will not appear in the Map Sub Report Prompts grid in composite report configuration. To map a subreport prompt, ensure the prompt is enabled at runtime." Other options do not directly cause this issue: default values on prompts do not suppress them, security issues would block data but not hide the prompt mapping, and prompt set configuration errors affect defaulting but not visibility.
Thus, the correct answer is B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
NEW QUESTION # 13
You are configuring a data column on a composite report. You would like to map a subreport prompt to a value in a prompt set, but the prompt is not appearing on the Map Sub Report Prompts grid in the column configuration options.
What could be causing this?
- A. You already set a default value for the prompt on the subreport.
- B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
- C. You do not have access to the domain securing the report prompt.
- D. You did not select Use Value From Prompt Set as the default prompt value in the subreport.
Answer: B
Explanation:
In Workday, when you configure composite reports, you can map subreport prompts to prompt sets for greater flexibility. However, if the Do Not Prompt at Runtime checkbox is selected on the subreport prompt, the prompt will not be exposed in the Map Sub Report Prompts grid. This is because Workday interprets the prompt as suppressed and therefore not available for mapping at runtime.
From the Workday binder: "Prompts suppressed with the Do Not Prompt at Runtime option will not appear in the Map Sub Report Prompts grid in composite report configuration. To map a subreport prompt, ensure the prompt is enabled at runtime." Other options do not directly cause this issue: default values on prompts do not suppress them, security issues would block data but not hide the prompt mapping, and prompt set configuration errors affect defaulting but not visibility.
Thus, the correct answer is B. The Do Not Prompt at Runtime checkbox is selected for the prompt on the subreport.
NEW QUESTION # 14
You are creating a custom report that displays employee salary amounts. You need to ensure that compensation analysts have the appropriate security permissions to view this information for all employees.
How do you confirm the security group's access to salary amounts?
- A. Review the domain security policy on the report's data source.
- B. Review the domain security policy on the salary amount report field.
- C. Run the Activate Security Policy Pending Changes task.
- D. Assign individuals to the compensation analyst security group.
Answer: B
Explanation:
In Workday, access to sensitive data such as salary amounts is controlled at the report field level through security domains. Even if a user has access to the report itself or the data source, they will not be able to see secured fields unless their security group has permission to the domain that specifically secures that field.
The Workday HCM Reporting documentation explains that report fields are securable items and are governed by domain security policies. To confirm whether compensation analysts can view salary amounts for all employees, you must review the domain security policy associated with the Salary Amount report field and verify that the appropriate security group has View (or higher) access.
From the Workday documentation:
"Security access to report fields is controlled by domain security policies. Users must have access to the domain that secures a report field in order to view its data."
"Even when users have access to a report or data source, secured fields will not display unless domain permissions are granted." Running Activate Security Policy Pending Changes applies changes but does not confirm access. Assigning users to a security group does not ensure that the group has the correct domain permissions. Reviewing only the data source security is insufficient because salary visibility is controlled at the field/domain level.
NEW QUESTION # 15
An HR analyst has many visualizations in different discovery boards that use the Workers for HCM Reporting data source on the Worker primary business object. The analyst wants to drill into one of the visualizations by Worker. Upon drilling, the analyst notices that Worker is not a listed Drill By field option. They want to drill by Worker without editing the Drill By list of the other visualizations.
How would the analyst configure this?
- A. Create a control from a sheet filter and filter the data by Worker from the Control Panel.
- B. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
- C. Drag and drop the Worker field in one of the dimensions of this visualization in the Builder Panel.
- D. Add Worker as a Drill By field from the Maintain Field Lists for Discovery Boards report.
Answer: B
Explanation:
In Discovery Boards, drill behavior is defined in the Drill By field list. To add Worker as a drillable option in just one visualization, the analyst can override the Drill By list in the Configuration Panel of that visualization. This allows Worker to appear as a drill dimension without altering the defaults applied across other visualizations.
From the Workday documentation: "You can override Drill By field lists in the visualization configuration panel. This enables drill customization on a per-visualization basis without impacting other discovery boards." The other options are less appropriate: Maintain Field Lists changes the default for all boards; adding Worker as a dimension affects grouping, not drilling; and sheet filter controls allow filtering but do not add drill options.
Thus, the correct choice is D. Override the Drill By field list and add Worker in the Configuration Panel for this visualization.
NEW QUESTION # 16
Refer to the following scenario to answer the question below.
You have prepared the following matrix report for a recruiting manager.
The recruiting manager would like to view the top ten hiring sources, rather than just three.
How can you adjust the report definition to address this requirement?
- A. Configure a Field Values group on the Group by Field.
- B. Edit the Axis Scale on the Output tab.
- C. Edit the Maximum Number of Rows field.
- D. Edit the Sort Rows field on the Row Grouping column.
Answer: C
Explanation:
In Workday matrix reports, the number of rows returned is controlled by the Maximum Number of Rows setting. By default, reports may limit output rows (for example, showing only the top 3). To display more results-such as the top 10 hiring sources-you must increase this value in the report definition.
From the Workday Reporting documentation:
"You can limit or expand the number of rows displayed in a matrix report by editing the Maximum Number of Rows field."
"To display more than the default, update the value in the report definition." Therefore, the correct way to adjust this report to display the top 10 hiring sources is B. Edit the Maximum Number of Rows field.
NEW QUESTION # 17
The HR administrator is complaining about a report that is running slowly. The report uses the Trended Workers data source and includes a field on the related Worker business object.
How can you improve report performance without altering the report requirements?
- A. Create a calculated field on the Trended Worker business object.
- B. Run the Purge Worker Trending Data task.
- C. Add the field to the Trended Workers data source.
- D. Run the Create Worker Trending Data task.
Answer: C
Explanation:
Performance issues often occur when trending reports pull fields from related business objects instead of directly from the Trended Workers data source. This requires Workday to join across objects at runtime, slowing down report execution. To improve performance, you should add the required field to the Trended Workers data source, ensuring the data is pre-joined and optimized for trending.
From the Workday binder: "To improve performance, add commonly reported fields directly to the Trended Workers object. Using related business object fields requires additional joins and increases report runtime." Creating calculated fields adds complexity rather than improving speed. Purging or re-creating trending data maintains system hygiene but does not address field-level performance.
Thus, the correct solution is A. Add the field to the Trended Workers data source.
NEW QUESTION # 18
You want to view benefit cost by benefit enrollment for the current year compared to the prior year to evaluate increases or decreases in plan enrollment, displaying formatted cost and count variance calculations.
What type of report would allow you to do this?
- A. Matrix Report
- B. Advanced Report
- C. Trending Report
- D. Composite Report
Answer: C
Explanation:
To evaluate year-over-year changes in benefit costs and enrollments, you need historical data comparisons over time. The Trending Report type is designed for exactly this use case, leveraging data sources like Trended Workers to display snapshots at periodic intervals and calculate variances between time periods.
From the Workday binder: "Trending reports allow you to track changes to worker data across time. These reports support analysis of headcount, demographics, benefit enrollments, and cost variances year-over-year or month-over-month." Advanced and Matrix reports provide strong analysis capabilities, but they are based on current or related effective-dated data, not time-series snapshots. Composite reports combine multiple subreports but do not inherently manage trending data or variance calculations across years.
Therefore, the only correct option for year-over-year benefit enrollment and cost variance is D. Trending Report.
NEW QUESTION # 19
You need to create a report to show the trend of worker headcount over time.
What is the most appropriate data source for this report?
- A. Trended Workers
- B. Headcount
- C. Workers for HCM Reporting
- D. Worker History
Answer: A
Explanation:
The Trended Workers data source is specifically designed for reports that display trends over time, such as headcount, turnover, and demographics. It captures periodic snapshots of worker data (monthly, quarterly, etc.), which allows organizations to track workforce metrics historically.
From the Workday binder: "Trended Workers captures snapshots of worker data at periodic intervals, providing historical reporting across time dimensions. This enables reporting on headcount, attrition, and demographics in a time series format." By contrast, Workers for HCM Reporting is used for current-state data, not trending. Worker History provides effective-dated transaction-level history but does not automatically generate trending snapshots. Headcount is a standard delivered report and not a reusable data source for custom trending analysis.
Therefore, the most appropriate data source for worker headcount trends over time is A. Trended Workers.
NEW QUESTION # 20
A recruiter is running a dashboard and no data is appearing in the Top New Applications by Job Profile worklet tile.
What could be the cause of the issue?
- A. The recruiter has constrained access to the report's data source or data source filter.
- B. The recruiter does not have access to the Top New Applications by Job Profile report.
- C. The dashboard configuration does not include Top New Applications by Job Profile as a required worklet.
- D. The recruiter does not have access to the domain securing the dashboard.
Answer: A
Explanation:
If a recruiter sees an empty dashboard tile, the most likely cause is constrained security access. Even though the dashboard is properly configured and the worklet is enabled, Workday's security framework ensures that report results vary by user depending on their role and assigned constraints.
From the Workday Reporting binder: "Report results differ between users if security constraints apply. Constrained security groups grant access only to a subset of data... Unconstrained security groups grant users access to all target instances of a securable item." .
In this scenario, the recruiter likely has constrained access to only their supervisory organization or region. As a result, the "Top New Applications by Job Profile" report returns no records in the worklet tile.
Other options are less likely: if the recruiter lacked access to the report entirely, the tile would not appear; required vs. optional dashboard configuration would not impact existing data visibility; and domain-level security applies to report access, not data filtering.
Therefore, the correct answer is C. The recruiter has constrained access to the report's data source or data source filter.
NEW QUESTION # 21
The Recruiting department requested a report that shows job applications by recruiting source, displayed through count and percent summaries that they can drill into to further analyze the data.
What report type fulfills these requirements?
- A. Matrix
- B. nBox
- C. Advanced
- D. Search
Answer: A
Explanation:
Workday offers several custom report types: Advanced, Matrix, Composite, Search, and Trending .
Advanced Reports: Allow sorting, filtering, grouping, totals, and charts but are not designed for percentage summarizations across grouped data.
Search Reports: Show search results based on facet filters, not suited for summarization and percentages.
nBox Reports: Used for displaying workers or positions across two dimensions (e.g., performance vs. potential).
Matrix Reports: Specifically designed for grouping data, applying summarizations (count, sum, percent), and drilling
NEW QUESTION # 22
You are configuring a waterfall visualization showing employee movement. To properly display the information, you need the Termination Count field to return as a negative number.
- A. Format Number
- B. Numeric Constant
- C. Arithmetic Calculation
- D. Extract Single Instance
Answer: C
Explanation:
When creating custom reports and visualizations, calculated fields can transform values. To change positive counts into negative values (such as terminations in a waterfall chart), you use the Arithmetic Calculation function. This function allows you to perform math operations (addition, subtraction, multiplication, division) on numeric fields. By multiplying the Termination Count by -1, the result displays as a negative number.
From Workday Reporting documentation:
"Arithmetic Calculation - Performs mathematical operations on numeric fields. You can create new numeric outputs such as percentages, ratios, or negatives by applying arithmetic logic." Thus, the correct answer is C. Arithmetic Calculation.
NEW QUESTION # 23
You are building a report that shows employee performance ratings and their associated performance review details. The report uses the Performance Review primary business object. Using a calculated field, what formula should you use to retrieve the employee's job title from the related Worker business object?
- A. Lookup Related Value
- B. Lookup Range Band
- C. Aggregate Related Instances
- D. Evaluate Expression Band
Answer: A
Explanation:
The correct choice is Lookup Related Value, because this function allows you to retrieve a field from a related business object that is not directly stored on your primary object. In this scenario, the primary business object is Performance Review, which holds performance-related data but not job-related data such as Job Title. Since Job Title resides on the Worker business object, you need to link from Performance Review to Worker and then retrieve Job Title.
The Workday reporting guide explains: "Lookup Related Value - Returns a field from a related business object. Use this to bring data from associated objects into a report when the field is not directly available on the primary object." . This ensures the Performance Review data can be combined with Job Title for meaningful insights.
By contrast, Aggregate Related Instances is used to roll up multiple related values, Range Band applies thresholds, and Evaluate Expression Band is used for conditional ranges, not cross-object retrieval.
NEW QUESTION # 24
A report that uses an indexed data source is running slowly for an HR analyst. The report is sorted by the Worker object field.
What can you do to improve the sorting performance?
- A. Create a calculated field that only pulls the first name of the worker
- B. Sort by the Full Name (text) field instead
- C. Change the data source on the report
- D. Select the Sort by First Accessible Column checkbox
Answer: B
Explanation:
When reports use Indexed Data Sources, performance issues can arise if sorting is attempted on fields that are not indexed. In the case of the Worker object, sorting directly by the Worker object field is slower. Workday best practice is to sort by text-based fields such as the "Full Name (text)" field, which improves query performance because it leverages indexed fields.
From the Workday reporting materials:
*"For indexed data sources, performance improves when sorting by text fields such as Full Name (text), instead of object fields. Sorting by object fields causes slower performance, whereas text-based fields use the
NEW QUESTION # 25
You transferred ownership of your report to an HR Analyst. Then, you run the Custom Report Exception Audit report, and a critical error appears next to the report you just transferred.
Why could this be?
- A. The HR Analyst does not have access to all of the fields on the report.
- B. The report is not shared with anyone.
- C. The report has prompts.
- D. The HR Analyst is not in the same location as you are.
Answer: A
Explanation:
When ownership of a custom report is transferred in Workday, the system immediately evaluates whether the new report owner has full security access to all components of the report. This includes access to the data source, all report fields, calculated fields, and any secured domains referenced by the report. If the new owner lacks access to even one secured field or domain, the report becomes invalid for that owner.
The Custom Report Exception Audit report is specifically designed to identify these types of issues. A critical error appears when the report owner does not meet the minimum security requirements to maintain or run the report.
From the Workday HCM Reporting documentation:
"When transferring ownership of a custom report, the new owner must have access to all fields and data sources used in the report. If access is missing, the Custom Report Exception Audit will flag the report with an error."
"Critical errors indicate security or configuration issues that must be resolved for the report to function correctly." The other options are incorrect because location has no impact on report ownership, prompts are supported in reports, and sharing controls visibility-not ownership validity.
NEW QUESTION # 26
You have selected the Enable As Worklet checkbox on a report definition and added the Recruiting dashboard in the Available On field. You share the report definition with all authorized users and run the Recruiting dashboard but the worklet is not appearing.
What could be the reason for this?
- A. The worklet has more than 100 rows of data.
- B. You need to configure the Recruiting dashboard to include the worklet.
- C. The worklet needs to be setup as required on the dashboard.
- D. Your security needs to be updated to view the worklet.
Answer: B
Explanation:
Enabling a report as a worklet and assigning it to a dashboard does not automatically make it visible. The Recruiting dashboard (or any dashboard in Workday) must be configured to include the worklet explicitly. This is a common oversight-report designers assume that enabling a report as a worklet is sufficient, but the dashboard itself must be updated in configuration to display that worklet tile.
From the Workday reporting materials: "Dashboards provide an interface to view multiple worklets. Even if a report is enabled as a worklet, the dashboard configuration determines which worklets are visible to end users." Other options are less relevant: exceeding 100 rows only impacts loading performance, not visibility; security issues would typically block data, not hide the worklet entirely; and required setup applies to whether the worklet is optional or required, but it must still be added to the dashboard.
Thus, the correct reason is B. You need to configure the Recruiting dashboard to include the worklet.
NEW QUESTION # 27
You need a calculated field that returns whether or not the initiator for a Manage Goals event is the worker's manager.
- A. Lookup Related Value
- B. True/False Condition
- C. Evaluate Expression
- D. Evaluate Expression Band
Answer: B
Explanation:
The True/False Condition calculated field is used to return Boolean results (True or False) based on defined criteria. In this scenario, the field must evaluate whether the event initiator equals the worker's manager. By setting that condition, the calculated field will return True if the initiator is the manager and False otherwise.
From Workday Reporting documentation:
"True/False Condition - Creates a Boolean field that evaluates a condition and returns True or False depending on whether the condition is met." Thus, the correct answer is B. True/False Condition.
NEW QUESTION # 28
You have created a composite report and are trying to add a matrix report as a subreport. However, when trying to configure a Data column, the matrix report is not available to select in the Sub Report Name field.
What can you check to identify the cause of this issue?
- A. Check that the summarization fields in the matrix report also match the selections in the Field to Aggregate field in the Data column settings.
- B. Check that the prompt defaults in the matrix report align with the prompt defaults defined in the composite report's Report Settings.
- C. Check that the configurations on the Filter Data in Sub Report grid also exist in the Filter tab of the matrix report definition.
- D. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
Answer: D
Explanation:
For a matrix report to be used as a subreport in a composite report, the group-by fields in the matrix report must align with the fields enabled for filtering and grouping in the composite report. If this alignment does not exist, Workday does not allow the matrix report to appear as a valid subreport option in the Sub Report Name dropdown.
From the Workday binder: "To include a matrix report as a subreport in a composite, the group-by fields of the matrix must match the fields enabled for grouping in the composite report. If these do not match, the matrix will not appear in the Sub Report Name selection." Other factors such as prompt defaults or filter settings may impact usability, but they do not prevent the matrix report from being selectable. The key dependency is the field alignment between the composite and the matrix group-by fields.
Therefore, the correct answer is A. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
NEW QUESTION # 29
You transferred ownership of your report to an HR Analyst. Then, you run the Custom Report Exception Audit report, and a critical error appears next to the report you just transferred.
Why could this be?
- A. The HR Analyst does not have access to all of the fields on the report.
- B. The report is not shared with anyone.
- C. The report has prompts.
- D. The HR Analyst is not in the same location as you are.
Answer: A
Explanation:
The Custom Report Exception Audit report identifies errors in custom reports, such as missing security access. If a new report owner does not have access to one or more fields on the report, it will trigger a critical error.
From the Workday Reporting documentation:
"The Custom Report Exception Audit report identifies issues such as missing field access when ownership of a report is transferred." Therefore, the correct answer is A. The HR Analyst does not have access to all of the fields on the report.
NEW QUESTION # 30
You want the ability to view every summarization in the composite report by Location.
What do you do?
- A. Include Location as a Detail Data field in one of the subreports.
- B. Include Location as a drillable field in one of the subreports.
- C. Include Location as a Detail Data field in all the subreports.
- D. Include Location as a drillable field in all the subreports.
Answer: C
Explanation:
Composite reports combine multiple subreports, and their summarizations depend on the fields configured in the subreports themselves. To enable consistent grouping and summarization across the entire composite report, the Location field must be included as a Detail Data field in all the subreports. This ensures that each subreport provides the Location context required for composite-level summarization.
From the Workday binder: "Composite reports aggregate results from multiple subreports. To summarize or drill consistently on a specific field, that field must exist as a Detail Data field in all subreports included in the composite." If Location is only included in one subreport, summarizations in the other subreports would not align, and Location-based grouping would fail. Similarly, making Location drillable only affects drill-down options, not summary-level grouping across the composite.
Thus, the correct answer is A. Include Location as a Detail Data field in all the subreports.
NEW QUESTION # 31
The Chief People Officer is running the Headcount by Year report and getting different results than an HR analyst, who is the report owner.
What is a possible cause of this?
- A. The Chief People Officer does not have access to the data source filter.
- B. Both the Chief People Officer and HR analyst have constrained access to the data source.
- C. The HR analyst did not properly transfer ownership of the report to the Chief People Officer.
- D. The HR analyst did not share the report with the Chief People Officer.
Answer: B
Explanation:
Reports in Workday respect data source security constraints. Different users may see different results in the same report if their access is limited. For example, an HR analyst may have constrained access only to certain organizations or workers, while the Chief People Officer may also have constraints.
From Workday Reporting and Security documentation:
"Report results differ between users if security constraints apply. Constrained security groups grant access only to specific target data (e.g., workers in certain supervisory orgs), while unconstrained groups can view all data." Thus, the likely cause is that both the Chief People Officer and the HR analyst have constrained access to the data source. Correct answer: C.
NEW QUESTION # 32
......
TestInsides Workday-Pro-HCM-Reporting Exam Practice Test Questions: https://prepaway.testinsides.top/Workday-Pro-HCM-Reporting-dumps-review.html